| *Technical Specification PBM 250D, 500D, 1D, 2D, 5D ::.. |
|
|
| DESCRIPTION |
UNIT |
PBM 250D |
PBM 500D |
PBM 1D |
PBM 2D |
PBM 5D |
| Screw Diameter |
MM |
38 |
45 |
50 |
60 |
65 |
| Screw RPM |
- |
0-96 |
0-96 |
0-96 |
0-96 |
0-80 |
| Plasticising Capacity |
KG/HR |
15-18 |
28-30 |
35-40 |
42-45 |
50-60 |
| Max. Article Wt. |
GMS |
50 |
75 |
100 |
150 |
325 |
| Max. Article Dia. |
MM |
65 |
75 |
100 |
125 |
200 |
| Max./Min. Hold Thk. |
MM |
135/120 |
150/125 |
175/150 |
200/175 |
275/225 |
| Max./Mold Height/width |
MM |
225/130 |
225/130 |
300/200 |
350/250 |
450/350 |
| Min./Max. Volume |
ML |
20/250 |
30/500 |
100/1000 |
250/2000 |
1000/5000 |
| Max. Mold Open Stroke |
MM |
125 |
150 |
175 |
200 |
275 |
| Screw Drive |
AC KW |
3.7 |
5 |
7.5 |
11 |
15 |
| Hyd. Pump Drive Motor |
KW |
3.7 |
3.7 |
3.7 |
3.7 |
7.5 |
| Extruder Heating Load |
KW |
5 |
7 |
8 |
11.5 |
12 |
| Head Heating Load |
KW |
1.8 |
1.8 |
2.6 |
3 |
4.8 |
| Blower |
KW |
0.11 |
0.11 |
0.11 |
0.11 |
0.11 |
| Total Electric Load |
KW |
14.31 |
17.61 |
21.91 |
29.31 |
39.41 |
| Oil Tank Capacity |
Ltrs. |
80 |
80 |
80 |
80 |
200 |
| Air Pressure |
KG/CM2 |
7 |
7 |
7 |
7 |
7 |
| Air Cunsumption |
Ltr/Min |
90 |
100 |
125 |
200 |
200 |
| Accumulater Capacity |
GMS |
N.A. |
N.A. |
N.A. |
N.A. |
N.A. |
| Floor Space (Appr. Mtr.) |
LxMxH |
2.1x2.1x2.1 |
2.1x2.1x2.1 |
2.1x2.1x2.1 |
2.8x2.5x 2.5 |
2.8x2.8x2.7 |
| Machine Weight Apprx.) |
MT |
2.1 |
2.3 |
3.5 |
4 |
4.5 |
|
| ^ Top |
| |
| *Technical Specification PBM 500 H, 1H, 2H, 5H ::.. |
|
|
| DESCRIPTION |
UNIT |
PBM 500H |
PBM 1H |
PBM 2H |
PBM 5H |
| Screw Diameter |
MM |
38 |
45 |
50 |
60 |
| Screw RPM |
- |
0-96 |
0-96 |
0-96 |
0-96 |
| Plasticising Capacity |
KG/HR |
15-18 |
28-32 |
35-40 |
42-45 |
| Max. Article Wt. |
GMS |
75 |
100 |
150 |
325 |
| Max. Article Dia. |
MM |
75 |
100 |
125 |
200 |
| Max./Min. Hold Thk. |
MM |
150/125 |
175/100 |
200/175 |
275/225 |
| Max./Mold Height/width |
MM |
225/130 |
300/200 |
350/250
|
400/350 |
| Min./Max. Volume |
ML |
30/500 |
100/1000 |
250/2000 |
100/5000 |
| Max. Mold Open Stroke |
MM |
150 |
175 |
200 |
275 |
| Screw Drive |
AC KW |
3.7 |
5 |
7.5 |
11 |
| Hyd. Pump Drive Motor |
KW |
3.7 |
3.7 |
3.7 |
7.5 |
| Extruder Heating Load |
KW |
5 |
7 |
8 |
11.5 |
| Head Heating Load |
KW |
1.8 |
2.6 |
3.1 |
4.8 |
| Blower |
KW |
0.11 |
0.11 |
0.11 |
0.11 |
| Total Electric Load |
KW |
14.31 |
18.41 |
22.41 |
34.91 |
| Oil Tank Capacity |
Ltrs. |
80 |
80 |
80 |
80 |
| Air Pressure |
KG/CM2 |
7 |
7 |
7 |
7 |
| Air Cunsumption |
Ltr/Min |
70 |
100 |
150 |
250 |
| Accumulater Capacity |
GMS |
N.A. |
N.A. |
N.A. |
N.A. |
| Floor Space (Appr. Mtr.) |
LxMxH |
2.2x1.6x 2.2 |
2.3x1.7x 2.2 |
2.1x1.9x 2.5 |
2.8x2.1x 2.7 |
| Machine Weight Apprx.) |
MT |
1.7 |
2.4 |
3.5 |
4.2 |
|
| ^ Top |
| |
| Standard Features ::.. |
| STANDARD FEATURES |
- Four line LCD display microprocessor controller
- Energy saving electro proportional hydraulic system
- Festo Pneumatics
- A.C. variable frequency drive
- Three phase blowers
- Linear scale for carriage cylinder movements
- Audio visual alarm
- Heating insulation cover
- Moisture separator for main pneumatic circuit
- Inbuilt C.V.T for main controller
- Hook for clamping unit
- Single piece casted top blowing assembly
- Super finish tie-bars for smooth movements
- Arrow cutting with stroke adjustment facility
- Pressure switch for accurate clamping tonnage
- Hot cutting device (Five ltrs. and above)
- Helical gear box
- Three stage parison programmer (Two ltrs. and above)
- Stretching unit with blowing attachment (Five Ltrs. and above)
- Centralised water cooling arrangement
- Guard safety (Electrical)
|
|
|
|
| ^ Top |
| Optional Features ::.. |
| OPTIONAL FEATURES |
- Auto deflashing system (Upto two ltrs.)
- Hot cutting device (Two ltrs. and below)
- Three stage parison programmer (One ltrs. and below)
- Multi stage parison programmer with separate control unit
- Double head assembly (Upto five ltrs.)
- P.V.C Attachment
- High presure blowing system
- Parison squeezing facility
- Bottom blowing attachment (Two ltrs. and below)
- Angular blowing attachment
- Linear scale for clamping unit
- Hydraulically operated blow pin
- Energy meter
- FIFO based accumulator (5 Ltrs. and above)
|
|
|
|
| |
| |
|
NOTE |
| |
* |
Due to continuous technical development, specifications are subject to changed without
legal obligation on the part of manufacturer. |
| |
* |
Machine photographs shown in website contain some optional equipments. |
| |
|
|
| |
** |
|
|
|
| |
