| *Technical Specification PBM 20H, 50H ::.. |
|
|
| DESCRIPTION |
UNIT |
PBM 20H |
PBM 50H |
| Screw Diameter |
MM |
65 |
90 |
| Screw RPM |
- |
0-80 |
0-80 |
| Plasticising Capacity |
KG/HR |
50-60 |
80-90 |
| Max. Article Wt. |
GMS |
1500 |
3000 |
| Max. Article Dia. |
MM |
300 |
400 |
| Max./Min. Hold Thk. |
MM |
400/250 |
500/300 |
| Max./Mold Height/width |
MM |
550/500 |
825/710 |
| Min./Max. Volume |
ML |
5000/20000 |
20000/50000 |
| Max. Mold Open Stroke |
MM |
610 |
750 |
| Screw Drive |
AC KW |
15 |
18.5 |
| Hyd. Pump Drive Motor |
KW |
11 |
11 |
| Extruder Heating Load |
KW |
12 |
23 |
| Head Heating Load |
KW |
5.1 |
12 |
| Blower |
KW |
0.11 |
1.6 |
| Total Electric Load |
KW |
43.21 |
66.1 |
| Oil Tank Capacity |
Ltrs. |
300 |
400 |
| Air Pressure |
KG/CM2 |
7 |
7 |
| Air Cunsumption |
Ltr/Min |
350 |
500 |
| Accumulater Capacity |
GMS |
3000 |
6000 |
| Floor Space (Appr. Mtr.) |
LxMxH |
3.8x2.5x3.3 |
5.2x3.7x2.7 |
| Machine Weight Apprx.) |
MT |
6.5 |
9.5 |
|
| ^ Top |
| |
| Standard Features ::.. |
| STANDARD FEATURES |
- Four line LCD display microprocessor controller
- Energy saving electro proportional hydraulic system
- Festo Pneumatics
- A.C. variable frequency drive
- Three phase blowers
- Linear scale for carriage cylinder movements
- Audio visual alarm
- Heating insulation cover
- Moisture separator for main pneumatic circuit
- Inbuilt C.V.T for main controller
- Hook for clamping unit
- Single piece casted top blowing assembly
- Super finish tie-bars for smooth movements
- Arrow cutting with stroke adjustment facility
- Pressure switch for accurate clamping tonnage
- Hot cutting device (Five ltrs. and above)
- Helical gear box
- Three stage parison programmer (Two ltrs. and above)
- Stretching unit with blowing attachment (Five Ltrs. and above)
- Centralised water cooling arrangement
- Guard safety (Electrical)
|
|
|
|
| ^ Top |
| Optional Features ::.. |
| OPTIONAL FEATURES |
- Auto deflashing system (Upto two ltrs.)
- Hot cutting device (Two ltrs. and below)
- Three stage parison programmer (One ltrs. and below)
- Multi stage parison programmer with separate control unit
- Double head assembly (Upto five ltrs.)
- P.V.C Attachment
- High presure blowing system
- Parison squeezing facility
- Bottom blowing attachment (Two ltrs. and below)
- Angular blowing attachment
- Linear scale for clamping unit
- Hydraulically operated blow pin
- Energy meter
- FIFO based accumulator (5 Ltrs. and above)
|
|
|
|
| |
| |
|
NOTE |
| |
* |
Due to continuous technical development, specifications are subject to changed without
legal obligation on the part of manufacturer. |
| |
* |
Machine photographs shown in website contain some optional equipments. |
| |
|
|
| |
** |
|
|
|
| |
