TW Series (TW-200)

TW Series as per Technical Specification

SR. NO. DESCRIPTION UNIT TW-200
A Injection Unit
1 Screw Diameter MM 50
2 Injection Pressure KG / CM 2 2400
3 System Pressure BAR 160
4 Screw Stroke MM 250
5 Stroke Volume CC 490
6 Shot Weight (PS) GMS 435
7 Injection Rate GMS/SEC 500
8 Injection Speed MM/SEC 300
9 Plasticising Cap.(PS) **Max. Speed GMS/SEC 31
10 L/D Ratio   22
11 Screw Revolution RPM 260
12 Heating Capacity KW 15
13 No.of Heating Zone NOS 5
14 Nozzle Contact Force TONNES 3.6
15 Locating Ring Diameter MM 160
B Locking Unit
16 Type (Integrated Cast)   VERTICAL
17 Clamping Force TONNES 200
18 Mould Opening Stroke MM 470
19 Max/Win Mould Height MM 530 / 200
20 Max. Daylight MM 1000
21 Dist. Between Tie Bar MM 515 X 515
22 Size Of Mould Platen MM 765 X 765
23 Ejector Force TONNES 7.5
24 Ejector Stroke MM 130
25 No. Of Ejector Pin NOS 5
C General Data
25 Pump Drive KW 31
26 Total Load KW 46
27 Oil Tank Capacity LITRE 280
28 Machine Dim. L X W X H MTR 5.90 X 1.35 X 2.27
29 Machine Weight TONNES 7.5