VP Series
VP Series as per Technical Specification
| Description | Unit | VP 30 | VP 50 | VP 70 | VP 100 |
|---|---|---|---|---|---|
| Injection Unit | |||||
| Screw Meter | MM | 25.4 | 30 | 35 | 40 |
| Injection Pressure | BAR | 1560 | 1850 | 1530 | 1600 |
| System Pressure | BAR | 125 | 150 | 125 | 150 |
| Screw Stroke+SB | MM | 115 +10 | 135+10 | 135+10 | 140+10 |
| Stroke Volume | CC | 58 | 95 | 130 | 180 |
| Shot Weight (PS) | GMS | 50 | 86 | 116 | 160 |
| Injection Rate | GMS/SEC | 35 | 50 | 48 | 87 |
| Injection Time | SECOND | 1.4 | 2.2 | 2.3 | 1.8 |
| Plasticising Cap.(PS) **Max.Speed | GMS/SEC | 5 | 10.5 | 8.3 | 14 |
| L/D Ratio | 21:01 | 21:01 | 21:01 | 22:01 | |
| Screw Revolution | RPM | 240 | 280 | 225 | 230 |
| Heating Capacity | KW | 4.2 | 5.2 | 7.25 | 9.1 |
| No. of Heating Zone | 4 | 4 | 4 | 5 | |
| Nozzle Contact Force | Tonnes | 2.8 | 2.2 | 3 | 2.5 |
| Locating Ring Diameter | MM | 75 | 100 | 110 | 125 |
| Nozzle Centre | MM | 198 | 198 | 198 | 198 |
| Locking Unit | |||||
| Type(Integrated Cast) | Horizontal | Vertical | Horizontal | Vertical | |
| Clamping Force | Tonnes | 30 | 50 | 80 | 100 |
| Mold Opening Stroke | MM | 200 | 265 | 300 | 360 |
| Max/Min Mold Height | MM | 250/100 | 320/120 | 360/150 | 450/160 |
| Max. Daylight | MM | 450 | 585 | 660 | 810 |
| Distance Bet. Tie Bar | MM | 250 X 250 | 310 X 310 | 360 X 360 | 410 X 410 |
| Size Of Mold Platten | MM | 400 x 400 | 480 X 480 | 540 x 540 | 615 x 615 |
| Ejector Force | Tonnes | 2.5 | 2.9 | 3.5 | 4.5 |
| Ejector Stroke | MM | 60 | 70 | 60 | 130 |
| General Data | |||||
| Pump Drive | KW | 5 | 7.5 | 7.5 | 11 |
| Total Load | KW | 9.2 | 12.7 | 14.75 | 20.1 |
| Oil Tank Capacity | Litre | 110 | 135 | 175 | 200 |