NP Series
NP Series
Advantage
Engineered for robust, long-lasting sustainability!
- Integrated Casted Vertical Five Point Double Toggle System
- T-Slot - Drilling Taping for Mould Clamp
- Three Stage Mould Open/ Close Speed
- Sensitive Low Pressure Mould Safety
- Linear Scale For Position Based Functions
- Motorized Mould Height Adjustment with Auto Tonnage Built up
- Guard Safety
- Hydraulic Ejector System (Linear Scale based - Multi Points - Multi Stroke)
- Centralized Auto Lubrication System (Grease Based)
- Air Ejector System (Both Halves)
- Core Pulling (Single Cylinder)
- Core Pulling Provision (For Second Cylinder)
- LM Guide Based Injection Unit (70T & Above)
- Twin Cylinder Balanced Injection Unit
- Five Stage Reduced Injection Pressure System
- Linear Scale For Position Based Functions
- Five Stage Reduced Injection Speed System
- Auto Reciprocating Injection Unit
- Suck Back System RPM Indicator
- Heating Insulation Cover
- Injection Hold On System
- Radial Piston Hydro Motor
- Back Pressure Control (Manual)
- Electrical Supply Socket for Auxiliary Attachment
- Color Monitor
- Programmable Logical Controller
- Audio Visual Alarm
- Energy Consumption In-built Display in PLC
- Energy Saving Variable Displacement Pump
- Power Saver Servo Motor Control
- Bi - Metal Screw Barrel
- Dynamic Barrier Screw
- Back Pressure Control (PLC Based)
- Water Battery
- Ejector On Fly
Sr. | Description | Unit | NP 20/40 | NP 50/100 | NP 70/140 | NP 100/200 | NP 125/250 | NP 150/300 | ||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
A | Injection Unit | A | B | C | A | B | C | A | B | C | A | B | C | |||
1 | Screw Diameter | MM | 25.4 | 30 | 35 | 37 | 40 | 37 | 40 | 43 | 40 | 45 | 48 | 45 | 50 | 55 |
2 | Injection Pressure | BAR | 1560 | 1840 | 1930 | 1730 | 1480 | 1960 | 1680 | 1450 | 2010 | 1590 | 1400 | 2160 | 1750 | 1440 |
3 | System Pressure | BAR | 125 | 150 | 150 | 150 | 150 | 150 | ||||||||
4 | Screw Stroke | MM | 115+10 | 145 | 125 | 165 | 215 | 220 | ||||||||
5 | Stroke Volume | CC | 58 | 95 | 123 | 137 | 160 | 172 | 201 | 232 | 270 | 342 | 389 | 334 | 412 | 499 |
6 | Shot Weight (PS) | GMS | 50 | 86 | 110 | 123 | 145 | 154 | 181 | 209 | 243 | 308 | 350 | 301 | 371 | 449 |
7 | Injection Rate | GMS/SEC | 35 | 50 | 68 | 77 | 90 | 103 | 120 | 139 | 135 | 171 | 194 | 137 | 169 | 204 |
8 | Injection Time | SECOND | 1.4 | 1.3 | 1.6 | 1.5 | 1.5 | 2.2 | ||||||||
9 | Plasticising Cap. (PS) | GMS/SEC | 5 | 8 | 12 | 14 | 19 | 11.7 | 14 | 15.8 | 12.3 | 16 | 25 | 19.6 | 25 | 29.3 |
**Max. Speed | ||||||||||||||||
10 | L/D Ratio | 22:01 | 21:01 | 20.6:01 | 19.5:01 | 18:01 | 21.1.01 | 19.6:01 | 18.2:01 | 22.5:01 | 20:01 | 18.8:01 | 22.2:01 | 20:01 | 18.2:01 | |
11 | Screw Revolution | RPM | 240 | 400 | 216 | 230 | 260 | 260 | ||||||||
12 | Heating Capacity | KW | 4.4 | 5.3 | 8 | 8.8 | 13 | 14.8 | ||||||||
13 | No. of Heating Zone | NOS | 4 | 4 | 4 | 4 | 5 | 5 | ||||||||
14 | Nozzle Contact Force | TONNES | 2.8 | 2.5 | 3.2 | 3.2 | 4.6 | 6.5 | ||||||||
15 | Locating Ring Diameter | MM | 75 | 100 | 100 | 125 | 125 | 160 | ||||||||
B | Locking Unit | |||||||||||||||
16 | Type (Integrated Cast) | HORIZONTAL | VERTICAL | VERTICAL | VERTICAL | VERTICAL | VERTICAL | |||||||||
17 | Clamping Force | TONNES | 20 | 50 | 70 | 100 | 125 | 150 | ||||||||
18 | Mould Opening Stroke | MM | 200 | 260 | 320 | 365 | 420 | 470 | ||||||||
19 | Max/Min Mold Height | MM | 250/100 | 320/120 | 380/150 | 450/160 | 480/180 | 530/200 | ||||||||
20 | Max. Daylight | MM | 450 | 580 | 700 | 815 | 900 | 1000 | ||||||||
21 | Dist. Between Tie Bar | MM | 250 X 250 | 310X310 | 365X365 | 410X410 | 465 X 465 | 515X515 | ||||||||
22 | Size of Mould Platen | MM | 400X400 | 480 X 480 | 545X545 | 600X600 | 680 X 680 | 765 X 765 | ||||||||
23 | Ejector Force | TONNES | 2.5 | 2.2 | 2.75 | 3.9 | 4 | 6.2 | ||||||||
24 | Ejector Stroke | MM | 60 | 70 | 100 | 130 | 130 | 130 | ||||||||
25 | No. of Ejector Pin | NOS | 1 | 4+1 | 5 | 4+1 | 4+1 | 8+1 | ||||||||
C | General Data | |||||||||||||||
26 | Pump Drive | KW | 5.5 | 5.5 | 9.3 | 11 | 15 | 15 | ||||||||
27 | Total Load | KW | 9.9 | 10.8 | 17.3 | 19.8 | 28 | 29.8 | ||||||||
28 | Oil Tank Capacity | LITRE | 110 | 135 | 185 | 200 | 240 | 320 | ||||||||
29 | Machine Dim.LXWXH | MTR | 3.05X0.80X1.35 | 3.80X1.00X1.70 | 3.95X1.05X2.00 | 4.15X1.10X2.05 | 5.15X1.15X2.10 | 5.35X1.25X2.15 | ||||||||
30 | Machine Weight | TONNES | 3.5 | 4 | 4.5 | 5 | 5.5 | 6.7 |
Sr. | Description | Unit | NP 200/400 | NP 250/500 | NP 350/700 | NP 450/900 | NP 650 | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
A | Injection Unit | A | B | C | A | B | C | A | B | C | A | B | C | A | B | C | |
1 | Screw Diameter | MM | 50 | 55 | 60 | 60 | 65 | 70 | 65 | 70 | 75 | 75 | 80 | 85 | 100 | 110 | 125 |
2 | Injection Pressure | BAR | 2050 | 1690 | 1420 | 2100 | 1800 | 1550 | 2050 | 1800 | 1550 | 1770 | 1560 | 1300 | 1814 | 1500 | 1161 |
3 | System Pressure | BAR | 150 | 150 | 150 | 150 | 180 | ||||||||||
4 | Screw Stroke+SB | MM | 235+15 | 300 | 310+20 | 370+20 | 450 | ||||||||||
5 | Stroke Volume | CC | 490 | 593 | 707 | 848 | 995 | 1154 | 1094 | 1269 | 1457 | 1722 | 1959 | 2160 | 3534 | 4276 | 5522 |
6 | Shot Weight (PS) | GMS | 441 | 534 | 636 | 740 | 885 | 1029 | 995 | 1150 | 1325 | 1567 | 1786 | 1966 | 3358 | 4063 | 5246 |
7 | Injection Rate | GMS/SEC | 176 | 213 | 254 | 205 | 245 | 285 | 229 | 265 | 303 | 412 | 470 | 517 | 660 | 800 | 1033 |
8 | Injection Time | SECOND | 2.5 | 3.6 | 3.5 | 3.8 | 5.3 | ||||||||||
9 | Plasticising Cap. (PS) | GMS/SEC | 25 | 28 | 36 | 35 | 40 | 48 | 40 | 45 | 55 | 45 | 50 | 58 | 150 | ||
**Max. Speed | |||||||||||||||||
10 | L/D Ratio | 22.5:01 | 20:01 | 18:01 | 21:01 | 20:01 | 18:01 | 22:01 | 20:01 | 19:01 | 21:01 | 20:01 | 19:01 | 22:01 | 20:01 | 18:01 | |
11 | Screw Revolution | RPM | 180 | 180 | 180 | 160 | 130 | ||||||||||
12 | Heating Capacity | KW | 16.7 | 22 | 23.5 | 33 | 60 | ||||||||||
13 | No of Heating Zone | NOS | 5 | 5 | 5 | 6 | 11 | ||||||||||
14 | Nozzle Contact Force | TONNES | 7 | 7 | 10 | 10 | 16 | ||||||||||
15 | Locating Ring Diameter | MM | 160 | 160 | 160 | 200 | 200 | ||||||||||
B | Locking Unit | ||||||||||||||||
16 | Type (Integrated Cast) | VERTICAL | VERTICAL | VERTICAL | VERTICAL | RAM | |||||||||||
17 | Clamping Force | TONNES | 200 | 250 | 350 | 450 | 650 | ||||||||||
18 | Mold Opening Stroke | MM | 540 | 600 | 700 | 825 | 1350 | ||||||||||
19 | Max/Min Mold Height | MM | 600/220 | 660/250 | 750/250 | 820/300 | 450 | ||||||||||
20 | Max. Daylight | MM | 1140 | 1260 | 1450 | 1645 | 1800 | ||||||||||
21 | Dist. Between Tie Bar | MM | 570 X 570 | 660 X 660 | 725 X 705 | 800 X 800 | 950 X 950 | ||||||||||
22 | Size of Mold Platen | MM | 840 X 840 | 960 X 960 | 1040X1020 | 1140X1140 | 1400 X1400 | ||||||||||
23 | Ejector Force | TONNES | 6.2 | 8 | 13 | 14 | 16 | ||||||||||
24 | Ejector Stroke | MM | 130 | 160 | 160 | 200 | 200 | ||||||||||
25 | No. of Ejector Pin | NOS | 9 | 13 | 15 | 13 | 8 | ||||||||||
C | General Data | ||||||||||||||||
26 | Pump Drive | KW | 18.5 | 30 | 37 | 45 | 44 + 44 | ||||||||||
27 | Total Load | KW | 35.2 | 52 | 60.5 | 78 | 148 | ||||||||||
28 | Oil Tank Capacity | LITRE | 360 | 550 | 650 | 700 | 2000 | ||||||||||
29 | Machine Dim. LXWXH | MTR | 5.95X1.35X2.30 | 8.10X1.65X2.65 | 8.05X1.75X2.85 | 8.85X1.85X3.00 | 12.00X3.00X3.00 | ||||||||||
30 | Machine Weight | TONNES | 9 | 11 | 15 | 24 | 40 |