PET Series
PET Series
Injection Moulding Machine
Pet solution designed for large-scale output!
- Larger Distance between Tie Bar
- Larger Ejector Stroke with High Force
- Ejector Retract Confirmation position based
- Screw Profile for PET Processing
- High Torque radial Piston Hydro Motor
- Variable Displacement Volume Pump
- Fascinate to Accommodate Bigger Size Moulds
- Smooth Ejection of Larger length of Performs
- Ensure Mould Safety
- Homogeneous Mixing at Lower melt Temperature
- High Plasticizing Rates at Low torque
- Low Power Consumption
Sr. | Description | Unit | PET 100 | PET 125 | PET 150 | PET 200 | PET 250 | PET 350 |
---|---|---|---|---|---|---|---|---|
A | Injection Unit | |||||||
1 | Screw Diameter | MM | 45 | 50 | 60 | 70 | 80 | 90 |
2 | Injection Pressure | BAR | 1260 | 1200 | 1110 | 980 | 1200 | 1080 |
3 | System Pressure | BAR | 150 | 150 | 150 | 150 | 150 | 150 |
4 | Screw Stroke | MM | 165 | 215 | 260 | 250 | 300 | 330 |
5 | Shot Weight (PET) | GMS | 310 | 495 | 850 | 1220 | 1780 | 2750 |
6 | Injection Rate | GMS/SEC | 200 | 300 | 386 | 452 | 610 | 770 |
7 | Injection Time | SECOND | 1.5 | 1.5 | 2.2 | 2.5 | 3.1 | 3.5 |
8 | Plasticising Cap.(PET) | GMS/SEC | 37 | 44 | 55 | 70 | 80 | 90 |
**MAX.SPEED | ||||||||
9 | L/D Ratio | 22:01 | 22:01 | 24:01 | 24:01 | 24:01 | 24:01 | |
10 | Screw Revolution | RPM | 200 | 190 | 144 | 130 | 130 | 130 |
11 | Heating Capacity | KW | 9.8 | 13 | 18 | 20 | 30 | 45 |
12 | No. Of Heating Zone | NOS | 5 | 5 | 6 | 7 | 7 | 8 |
13 | Nozzle Contact Force | TONNES | 2.5 | 4.6 | 6.5 | 7 | 7 | 10 |
14 | Locating Ring Diameter | MM | 125 | 125 | 160 | 160 | 160 | 160 |
B | Locking Unit | |||||||
15 | Clamping Force | TONNES | 100 | 125 | 150 | 200 | 250 | 350 |
16 | Mould Opening Stroke | MM | 365 | 420 | 470 | 540 | 600 | 700 |
17 | Max/Min Mould Height | MM | 450/160 | 480/180 | 530/200 | 600/220 | 660/250 | 750/250 |
18 | Max. Daylight | MM | 815 | 900 | 1000 | 1140 | 1260 | 1450 |
19 | Dist. Between Tie Bar | MM | 410X410 | 465X465 | 515X515 | 570X570 | 660X660 | 725X705 |
20 | Size Of Mould Platen | MM | 600X600 | 680X680 | 765X765 | 840X840 | 960X960 | 1040X1020 |
21 | Mould Weight Capacity | KG | 590 | 800 | 1100 | 1500 | 1800 | 3000 |
22 | Ejector Force | TONNES | 5.5 | 5.5 | 7.5 | 9.5 | 11.5 | 14 |
23 | Ejector Stroke | MM | 130 | 160 | 160 | 160 | 160 | 200 |
24 | No. Of Ejector Pin | NOS | 5 | 5 | 13 | 9 | 13 | 13 |
C | General Data | |||||||
25 | Pump Drive Motor | KW | 15 | 18.5 | 22 | 37 | 45 | 55 |
26 | Pump | LPM | 80 | 144 | 144 | 160 | 240 | 300 |
27 | Total Load | KW | 24.8 | 31.5 | 40 | 57 | 75 | 100 |
28 | Oil Tank Capacity | LITRE | 200 | 240 | 320 | 360 | 550 | 650 |
29 | Machine Dim. LXWXH | MTR | 4.15X1.10X2.05 | 5.25X1.15X2.10 | 5.80X1.25X2.15 | 5.95X1.35X2.30 | 8.10X1.65X2.65 | 8.05X1.75X2.85 |
30 | Machine Weight | TONNES | 5 | 5.5 | 7.5 | 9 | 11 | 15 |