Protek Series
- Integrated Casted Vertical Five Point Twin Toggle System
- T-Slot-Drilling Taping for Mould Clamp
- Three stage Mould Open/Close Speed
- Sensitive Low Pressure Mould Safety, Settable
- Linear Scale for Position Based Functions
- Motorized Mould Height Adjustment with Auto Tonnage Built up
- Guard Safety
- Hydraulic Ejector System {Linear Scale based MultiPoints-Multi stroke)
- Centralized Auto Lubrication System (Grease Based)
- Air Ejector System (Both Halves)
- Core Pulling (Single Cylinder)
- Core Pulling Provision (For Second Cylinder)
- Tapped holes on fixed platen top for take-out robot
- LM Guide Based Injection Unit
- Twin Cylinder Balanced Injection Unit
- Five Stage Reduced Injection Pressure System
- Five Stage Reduced Injection Speed System
- Linear Scale for Position Based Functions
- Auto Reciprocating Injection Unit
- Suck Back System
- Heating Insulation Cover
- Injection Hold On System
- Redial Piston Hydro Motor
- Back Pressure Control (Manual)
- RPM Indicator
- Electrical Supply Socket for Auxiliary Attachment
- Actual Current Display of Heating Zones
- Heater Failure & Thermocouple Failure Detection
- Accurate PID Temperature Control Settable on Screen
- Auto Heat Startup & Shutdown
- Soak Timer for Cold Start Protection
- High / Low Temperature Alarm
- Set & Actual Temperature Data with Bar Graph
- Color Monitor
- Programmable Logical Controller
- Audio Visual Alarm
- Energy Monitoring in HMI
- Process Parameter Change History
- Multi level Password Function
- IOT System
- Energy saving pump with servo motor and drive
- Low noise drive with quiet and fast responding pumps for hydraulics
- Pre-heating circuit for hydraulic oil
- Oil temperature regulated with temperature indication
- Low Oil Level Audible Alarm & Motor Shut Down
- Return Line Oil Filter with 10 Micron Filter
- Bi-Metal Screw Barrel
- Dynamic Barrier Screw
- Back Pressure Control (PLC Based)
Sr. | Description | Unit | Protek 120 | Protek 160 | Protek 200 | Protek 260 | ||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
A | Injection Unit | A | B | C | A | B | C | A | B | C | A | B | C | |
1 | Screw Diameter | MM | 37 | 40 | 45 | 40 | 45 | 50 | 50 | 55 | 60 | 50 | 55 | 60 |
2 | Injection Pressure | BAR | 2145 | 1837 | 1450 | 2200 | 1740 | 1410 | 2050 | 1700 | 1422 | 2050 | 1700 | 1422 |
3 | System Pressure | BAR | 175 | 175 | 160 | 160 | ||||||||
4 | Screw Stroke | MM | 180 | 250 | 250 | 275 | ||||||||
5 | Stroke Volume | CC | 193 | 226 | 286 | 314 | 397 | 491 | 491 | 594 | 707 | 540 | 653 | 777 |
6 | Shot Weight (PS) | GMS | 172 | 201 | 255 | 280 | 350 | 437 | 441 | 530 | 630 | 482 | 582 | 694 |
7 | Injection Rate | GMS/SEC | 120 | 144 | 179 | 153 | 194 | 240 | 200 | 232 | 276 | 192 | 233 | 276 |
8 | Injection Time | SECOND | 1.43 | 1.8 | 2.2 | 2.5 | ||||||||
9 | Plasticising Cap.(PS) | GMS/SEC | 15 | 17 | 27.6 | 16 | 20 | 24 | 26.8 | 32.4 | 38.5 | 25 | 28 | 48 |
**MAX.SPEED | ||||||||||||||
10 | L/D Ratio | 21 | 20 | 17.5 | 22.5 | 20 | 18 | 22.5 | 20 | 18 | 21 | 20 | 18 | |
11 | Screw Revolution | RPM | 285 | 260 | 236 | 236 | ||||||||
12 | Heating Capacity | KW | 8.8 | 13 | 15.75 | 16.7 | ||||||||
13 | No.Of Heating Zone | NOS | 4 | 5 | 5 | 5 | ||||||||
14 | Nozzle Contact Force | TONNES | 4 | 5.3 | 7 | 7 | ||||||||
15 | Locating Ring Diameter | MM | 125 | 125 | 160 | 160 | ||||||||
B | Locking Unit | |||||||||||||
16 | Clamping Force | TONNES | 120 | 160 | 200 | 260 | ||||||||
17 | Mold Opening Stroke | MM | 365 | 420 | 470 | 540 | ||||||||
18 | Max/Min Mold Height | MM | 450/160 | 480/180 | 530 / 200 | 600 / 220 | ||||||||
19 | Max. Daylight | MM | 815 | 900 | 1000 | 1140 | ||||||||
20 | Dist. Between Tie Bar | MM | 425X412 | 465X465 | 515X515 | 570X570 | ||||||||
21 | Size Of Mold Platen | MM | 620X600 | 680X680 | 765X765 | 840X840 | ||||||||
22 | Ejector Force | TONNES | 4 | 5.5 | 6.2 | 6.2 | ||||||||
23 | Ejector Stroke | MM | 130 | 140 | 160 | 160 | ||||||||
24 | No. Of Ejector Pin | NOS | 4+1 | 4+1 | 8+1 | 8+1 | ||||||||
C | General Data | |||||||||||||
25 | Pump Drive (SERVO) | KW | 21 | 25 | 30 | 30 | ||||||||
26 | Total Load | KW | 29.8 | 38 | 45.75 | 46.7 | ||||||||
27 | Oil Tank Capacity | LITRE | 200 | 240 | 320 | 320 | ||||||||
28 | Machine Dim. L X W X H | MTR | 4.41X1.12X2.08 | 4.98X1.21X2.22 | 5.6X1.34X1.27 | 6.8X1.9 X 2.42 | ||||||||
29 | Machine Weight | TONNES | 5 | 5.5 | 6.7 | 9 |