TW-ECO Series
TW-ECO Series
Compete the Thin Edge
High-speed production, light-weight product!
- Integrated Casted Vertical Five Point Double Toggle System
- T-Slot - Drilling Taping for Mould Clamp
- Three Stage Mould Open/ Close Speed
- Sensitive Low Pressure Mould Safety
- Linear Scale For Position Based Functions
- Motorized Mould Height Adjustment with Auto Tonnage Built up
- Guard Safety
- Hydraulic Ejector System (Linear Scale based - Multi Points - Multi Stroke)
- Centralized Auto Lubrication System (Grease Based)
- Air Ejector System (Both Halves)
- Core Pulling (Single Cylinder)
- Core Pulling Provision (For Second Cylinder)
- LM Guide Based Injection Unit (70T & Above)
- Twin Cylinder Balanced Injection Unit
- Five Stage Reduced Injection Pressure System
- Linear Scale For Position Based Functions
- Five Stage Reduced Injection Speed System
- Auto Reciprocating Injection Unit
- Suck Back System
- Heating Insulation Cover
- Injection Hold On System
- Radial Piston Hydro Motor
- Back Pressure Control (Manual)
- RPM Indicator
- Electrical Supply Socket for Auxiliary Attachment
- Color Monitor
- Programmable Logical Controller
- Audio Visual Alarm
- Energy consumption In-built Display in PLC
- Energy Saving Variable Displacement Pump
Sr. | Description | Unit | TW 100 | TW 125 | TW 150 | TW 200 |
---|---|---|---|---|---|---|
A | Injection Unit | A | B | A | B | |
1 | Screw Diameter | MM | 40 | 45 | 50 | 55 |
2 | Injection Pressure | KG/CM2 | 1680 | 1590 | 1750 | 1690 |
3 | System Pressure | BAR | 150 | 150 | 150 | 150 |
4 | Screw Stroke | MM | 165 | 215 | 220 | 250 |
5 | Stroke Volume | CC | 201 | 342 | 412 | 593 |
6 | Shot Weight (PS) | GMS | 181 | 308 | 371 | 534 |
7 | Injection Rate | GMS/SEC | 150 | 256 | 290 | 314 |
8 | Injection Time | SECOND | 1.3 | 1.2 | 1.3 | 1.7 |
9 | Plasticising Cap.(PS) | GMS/SEC | 18.45 | 22.92 | 27.5 | 33 |
**MAX.SPEED | ||||||
10 | L/D Ratio | 19.6:01 | 20:01 | 20:01 | 20:01 | |
11 | Screw Revolution | RPM | 310 | 320 | 280 | 260 |
12 | Heating Capacity | KW | 9.1 | 13 | 14.9 | 16.7 |
13 | No. Of Heating Zone | NOS | 4 | 5 | 5 | 5 |
14 | Nozzle Contact Force | TONNES | 3.2 | 4.6 | 6.5 | 7 |
15 | Locating Ring Diameter | MM | 125 | 125 | 160 | 160 |
B | Locking Unit | |||||
16 | Type (Integrated Cast) | Vertical | Vertical | Vertical | Vertical | |
17 | Clamping Force | TONNES | 100 | 125 | 150 | 200 |
18 | Mould Opening Stroke | MM | 365 | 420 | 470 | 540 |
19 | Max/Min Mould Height | MM | 450/160 | 480/180 | 530 / 200 | 600 / 220 |
20 | Max. Daylight | MM | 815 | 900 | 950 | 1140 |
21 | Dist. Between Tie Bar | MM | 410x410 | 465x465 | 515x515 | 570x570 |
22 | Size Of Mould Platen | MM | 600x600 | 680x680 | 765x765 | 840x840 |
23 | Ejector Force | TONNES | 3.9 | 4 | 6.2 | 6.2 |
24 | Ejector Stroke | MM | 130 | 130 | 130 | 130 |
25 | No. Of Ejector Pin | NOS | 5 | 5 | 9 | 9 |
C | General Data | |||||
26 | Pump Drive | KW | 15 | 18.5 | 18.5 | 30 |
27 | Total Load | KW | 24.1 | 31.5 | 33.4 | 46.7 |
28 | Oil Tank Capacity | LITRE | 200 | 240 | 320 | 360 |
29 | Machine Dim. L X W X H | MTR | 4.15x1.10x2.05 | 5.10x1.15x2.10 | 5.35x1.25x2.15 | 5.95x1.35x2.30 |
30 | Machine Weight | TONNES | 5 | 5.5 | 6.7 | 9 |