TW Series
TW Series
Thin Wall Deep Drawn Moulding
Thin wall deep-drawn container moulding solution
- Robust Integrated Casted Five Point Twin Toggle Clamping System
- T-Slot for easy Mould Change-Over
- Robust Box Type Moving Platen Withstand at High Injection Pressure
- Automatic mould Height and Tonnage Built-Up System
- Five Stage Closing/ Four Stage Opening Speed Setting
- Accurate and Sensitive Low Pressure Mould Safety
- Faster Clamping Operations with Precision Position Control for Robot ilnterface/IML
- Clamp Monitoring Through High Response Proportional Valve
- Linear Transducer for Accurate Clamp Position
- Centralized Automatic Lubricating System (Grease Based)
- Core Pulling System (Single Cylinder)
- Hydro Electrical Guard Safety
- Accumaulator Assisted High Speed Injection
- Injection Close loop Controls with State of the Art High Performance proportional Valve Control
- Very High Injection Efficiency supported with LM guide Smooth Motions technology
- Multi stage Variable Injection Pressure & Speed Profile
- Two Stage Variable Pressure/ Speed Hold on Position
- Injection Profile for Monitoring Injection Function
- Redial Piston Hydro Motor
- Three Stage Variable Pressure/ speed for refilling
- Digital RPM Indicator System
- Linear Scale for Accurate Injection Position Control
- Suck Back (Before/ After Refilling)
- Semi-Auto Purging Program
- Intrusion Moulding Program/ Flow Moulding
- Sprue Break with Timer
- Lubricating System for Injection (Grease Based-Manual)
- Sealed Nozzle Tip Heater
- Back Pressure Control (Through PLC-Digital)
- 32 Bit Fast Responsive Controller-Precise Pressure/ Velocity/ Position Controlled
- Color Monitor Display
- PLC Program Ladder Basis
- Dual High Speed 32 Bit CPU
- Password with Multi Level Setting
- All Functions Real Time Display
- Unscrewing Program
- Energy Efficient Variable Displacement Pump
- Single Module Pump Motor Mounting base for Easy maintenance
- Alarm for high Oil temperature
- appropriate Placement/ Indication for hydraulic Valves-Easy Approach
- Return Line Oil Filter with clogging Indicator
Sr. | Description | Unit | TW 200 |
---|---|---|---|
A | Injection Unit | ||
1 | Screw Diameter | MM | 50 |
2 | Injection Pressure | KG/CM2 | 2400 |
3 | System Pressure | BAR | 160 |
4 | Screw Stroke | MM | 250 |
5 | Stroke Volume | CC | 490 |
6 | Shot Weight (PS) | GMS | 435 |
7 | Injection Rate | GMS/SEC | 500 |
8 | Injection Speed | MM/SEC | 300 |
9 | Plasticising Cap.(PS) | GMS/SEC | 31 |
**MAX.SPEED | |||
10 | L/D Ratio | 22:01 | |
11 | Screw Revolution | RPM | 260 |
12 | Heating Capacity | KW | 15 |
13 | No. Of Heating Zone | NOS | 5 |
14 | Nozzle Contact Force | TONNES | 3.6 |
15 | Locating Ring Diameter | MM | 160 |
B | Locking Unit | ||
16 | Type (Integrated Cast) | Vertical | |
17 | Clamping Force | TONNES | 200 |
18 | Mould Opening Stroke | MM | 470 |
19 | Max/Min Mould Height | MM | 530/200 |
20 | Max. Daylight | MM | 1000 |
21 | Dist. Between Tie Bar | MM | 515x515 |
22 | Size Of Mould Platen | MM | 765x765 |
23 | Ejector Force | TONNES | 7.5 |
24 | Ejector Stroke | MM | 130 |
25 | No. Of Ejector Pin | NOS | 5 |
C | General Data | ||
26 | Pump Drive | KW | 31 |
27 | Total Load | KW | 46 |
28 | Oil Tank Capacity | LITRE | 280 |
29 | Machine Dim.LxWxH | MTR | 5.90x1.35x2.30 |
30 | Machine Weight | TONNES | 7.5 |