VP Series
VP Series
Insert Moulding
Expand the horizone...Insert moulding application...!
- Integrated casted five point double toggle system
- T-Slot for mold clamping (70 T & Above)
- Three stage mould open/close speed
- Sensitive low pressure mould safety
- Five stage reduced injection pressure system
- Five stage reduced injection speed system
- Auto receprocating injection unit
- Suck back system
- Heating insulation cover
- Injection hold on system
- Radial piston hydro motor
- Back pressure control (Manual)
- Micro processor control system
- Audio visual alarm
- Energy saving electro proportional hydraulic system
- Return line magnetic oil filter
Sr. | Description | Unit | VP 30 | VP 50 | VP 70 | VP 100 |
---|---|---|---|---|---|---|
INJECTION UNIT | ||||||
1 | SCREW DIAMETER | MM | 25.4 | 30 | 35 | 40 |
2 | INJECTION PRESSURE | BAR | 1560 | 1850 | 1530 | 1600 |
3 | SYSTEM PRESSURE | BAR | 125 | 150 | 125 | 150 |
4 | SCREW STROKE+SB | MM | 115 + 10 | 135 + 10 | 135 + 10 | 140 + 10 |
5 | STROKE VOLUME | CC | 58 | 95 | 130 | 180 |
6 | SHOT WEIGHT (PS) | GMS | 50 | 86 | 116 | 160 |
7 | INJECTION RATE | GMS/SEC | 35 | 50 | 48 | 87 |
8 | INJECTION TIME | SECOND | 1.4 | 2.2 | 2.3 | 1.8 |
9 | PLASTICISING CAP.(PS) **MAX. SPEED | GMS/SEC | 5 | 10.5 | 8.3 | 14 |
10 | L/D RATIO | 21:01 | 21:01 | 21:01 | 22:01 | |
11 | SCREW REVOLUTION | RPM | 240 | 280 | 225 | 230 |
12 | HEATING CAPACITY | KW | 4.2 | 5.2 | 7.25 | 9.1 |
13 | NO. OF HEATING ZONE | NOS | 4 | 4 | 4 | 5 |
14 | NOZZLE CONTACT FORCE | TONNES | 2.8 | 2.2 | 3 | 2.5 |
15 | LOCATING RING DIAMETER | MM | 75 | 100 | 110 | 125 |
16 | NOZZLE CENTRE | MM | 198 | 198 | 198 | 198 |
LOCKING UNIT | ||||||
17 | TYPE(lNTEGRATED CAST) | VERTICAL | VERTICAL | VERTICAL | VERTICAL | |
18 | CLAMPING FORCE | TONNES | 30 | 50 | 80 | 100 |
19 | MOLD OPENING STROKE | MM | 200 | 265 | 300 | 360 |
20 | MAX/MIN MOLD HEIGHT | MM | 250/100 | 320/120 | 360/150 | 450/160 |
21 | MAX. DAYLIGHT | MM | 450 | 585 | 660 | 810 |
22 | DISTANCE BET. TIE BAR | MM | 250X250 | 310X310 | 360X360 | 410X410 |
23 | SIZE OF MOLD PLATTEN | MM | 400X400 | 480X480 | 540X540 | 615X615 |
24 | EJECTOR FORCE | TONNES | 2.5 | 2.9 | 3.5 | 4.5 |
25 | EJECTOR STROKE | MM | 60 | 70 | 60 | 130 |
GENERAL DATA | ||||||
26 | PUMP DRIVE | KW | 5 | 7.5 | 7.5 | 11 |
27 | TOTAL LOAD | KW | 9.2 | 12.7 | 14.75 | 20.1 |
28 | OIL TANK CAPACITY | LITRE | 110 | 135 | 175 | 200 |