Multi Color Marble Effect
NP D Series - Double Color
- FA Type Microprocessor Taiwan Make
- Electro Proportional Hyd. System
- Core Pulling System. Single Cylinder
- Air Ejection System Moving and fix platen
- Auto Grease Lubrication System
- T-slot system for mold mounting
- Hallow Structure design for platen
- Integrated H-plate design
- Integrated Five Points Double Toggle system
- Five point Hydraulic Ejector System
- Sensitive Low Pressure Mould Safety
- Ceramic Heater
- Oil Temperature Indicator with interlock system
- Linear Scale for Injection, locking and ejection
- Twin cylinder injection System
- Motorized Mold height Adjustment (Proxi base)
- Audio Visual Alarm
- Electrical & Mechanical Guard Safety
| NP 80D | NP 100D | NP 125D | NP 150D | ||||||
|---|---|---|---|---|---|---|---|---|---|
| Description | A Side | B Side | A Side | B Side | A Side | B Side | A Side | B Side | |
| Injection Unit | |||||||||
| Screw Diameter | MM | 35 | 30 | 40 | 30 | 45 | 30 | 45 | 30 |
| Injection Presure | KG/SQ.CM | 1400 | 1480 | 1600 | 1480 | 1800 | 1480 | 1900 | 1480 |
| System Pressure | BAR | 150 | 150 | 150 | 150 | 140 | 150 | 150 | 150 |
| Injection Stroke | MM | 135+10 | 135+10 | 190+15 | 135+10 | 190+15 | 135+15 | 190+15 | 135+10 |
| Max. Shot Weight (PS) | GMS | 172 | 200 | 280 | 330 | ||||
| Plasticising Capacity | GMS/SEC. | 11 | 10.5 | 16 | 10.5 | 20 | 10.5 | 25 | 10.5 |
| Screw LD Ratio | 21:1 | 21:1 | 22:1 | 21:1 | 22:1 | 21:1 | 23:1 | 21:1 | |
| Screw Revolution | RPM | 250 | 250 | 190 | 260 | 210 | 280 | ||
| No. of Heating Zone | NOS. | 11 | 11 | 11 | 11 | ||||
| Nozzle Contact Force | Tonnes | 2.2 | 2.5 | 3.5 | 3.6 | ||||
| Injection Time | SECOND | 2.2 | 2.2 | 3.6 | 3.3 | 3.1 | 2.2 | 3.1 | 2.2 |
| Locking Unit | |||||||||
| Type ( INT. CASTED ) | Vertical | Vertical | Vertical | Vertical | |||||
| Clamping Force | Tonnes | 80 | 100 | 125 | 150 | ||||
| Mold Opening Stroke | MM | 300 | 360 | 420 | 470 | ||||
| Locating Ring Dia. | MM | 100 | 125 | 125 | 160 | ||||
| Distance Bet. Tiebar | MM | 365 X 365 | 410 X 410 | 465 X 465 | 515 X 515 | ||||
| Max/Min Mold Height | MM | 380 / 150 | 450 / 160 | 480 / 180 | 530/200 | ||||
| Size of Mould Platten | MM | 545 X 545 | 615 x 615 | 680 X 680 | 765 X 765 | ||||
| Max. Day Light | MM | 700 | 810 | 900 | 1000 | ||||
| Ejection Force | Tonnes | 2.75 | 4.5 | 4.5 | 7.5 | ||||
| Ejector Cyl. Stroke | MM | 100 | 130 | 130 | 130 | ||||
| No. of Ejector Pin | NOS. | 5 | 5 | 5 | 5 | ||||
| Electricals | |||||||||
| Electric Motor | KW | 15 | 18.5 | 22 | 22 | ||||
| Heating Load | KW | 22.8 | 22.8 | 26.5 | 26.5 | ||||
| Total Electric Load | KW | 37.8 | 41.3 | 48.5 | 48.5 | ||||
| General Data | |||||||||
| Oil Tank Capacity | LITRE | 200 | 200 | 270 | 350 | ||||
| Machine Weight | TON | 4.5 | 5.5 | 6.5 | 8.5 | ||||
* Double Colour Combination (A & B Side Injection Selection)