Multi Color Marble Effect

PML TC Series - Triple Color

  • FA Type Microprocessor Taiwan Make
  • Electro Proportional Hyd. System
  • Core Pulling System. Single Cylinder
  • Air Ejection System Moving and fix platen.
  • Auto Grease Lubrication System
  • T-slot system for mold mounting
  • Hallow Structure design for platen
  • Integrated H-plate design
  • Integrated Five Points Double Toggle system
  • Five point Hydraulic Ejector System
  • Sensitive Low Pressure Mould Safety
  • Ceramic Heater
  • Oil Temperature Indicator with interlock system
  • Linear Scale for Injection, locking and ejection
  • Twin cylinder injection System
  • Motorized Mold height Adjustment (Proxi base)
  • Audio Visual Alarm.
  • Electrical & Mechanical Guard Safety.
Sr. No. Description Machine Model   PML 100 TC PML 150 TC PML 250 TC PML 350 TC PML 450 TC
    Unit A Side B & C Side A Side B & C Side A Side B & C Side A Side B & C Side A Side B & C Side
A Injection Unit 
1 Screw Diameter MM 37 30 + 30 45 30 + 30 55 37 + 37 65 37 + 37 70 40 + 40
2 Injection Pressure KG/SQ.CM 1960 1840 1590 1840 1690 1730 1820 1730 1800 2010
3 System Pressure BAR 160 160 160 160 160
5 Max. Shot Weight(PS) GMS 154 + 80 + 80 308 + 80 + 80 534 + 123 + 123 776 + 123 + 123 1154 + 243 + 243
7 Screw L/D Ratio   21:01 21:01 20:01 21:01 20.5:1 19.5:1 20:01 19.5:1 20.6:01 22.5:01
6 Screw Revolution RPM 220 180 220 180 180 180 180
12 Injection Speed MM/SEC 110 120 114 120 95 105 105 105 110 120
B Locking Unit
14 Clamping Force TONNES 100 150 250 350 450
15 Mold Opening Stroke MM 365 470 600 700 750
16 Distance Bet. Tiebar MM 412 x 412 515 x 515 660 x 660 725 x 705 800 x 762
17 Max./Min Mold Height MM 450/160 530/200 660 750/250 820/300
18 Max. Daylight MM 815 1000 1260 1450 1570
19 Ejection Force TONNES 4 6.2 7 11 12
20 Ejector Stroke MM 130 130 160 160 200
C Electricals
23 Electric Motor KW 13 + 7.5 + 7.5 18.5 + 7.5 + 7.5 30 + 13 + 13 37 + 13 + 13 45 + 18.5 + 18.5
24 Heating Load KW 20 26 30 33 45
25 Total Electric Load KW 48 59.5 86 96 127
26 OVER ALL DIMENSION L X W X H 4.40 X 1.50 X 2.10 Mtr. 5.90 X 1.85 X 2.40 Mtr. 7.20 X 3.00 X 2.5 Mtr. 7.50 X 2.3 X 2.57 Mtr. 8.70 X 2.75 X 2.80 Mtr.
27 MACHINE WEIGHT TONNES 5.5 9 16 19 31
Sr. No. Description Machine Model   PML 550 TC PML 650 TC PML 750 TC PML 1000 TC
    Unit A Side B & C Side A Side B & C Side A Side B & C Side A Side B & C Side
A Injection Unit 
1 Screw Diameter MM 80 45 + 45 84 50 + 50 90 50 + 50 100 55 + 55
2 Injection Pressure KG/SQ.CM 1630 1590 1630 1750 1770 2050 1840 1690
3 System Pressure BAR 160 160 160 160
5 Max. Shot Weight (PS) GMS 1786 + 308 + 308 2242 + 371 + 371 2344 + 441 + 441 3250 + 534 + 534
7 Screw L/D Ratio   20:01 20:01 21:01 20:01 22:01 22.5:01 22:01 20.5:01
6 Screw Revolution RPM 120 180 120 180 120 180 110 180
12 Injection Speed MM/SEC 98 120 105 100 105 95 125 110
B Locking Unit
14 Clamping Force TONNES 550 650 750 1000
15 Mold Opening Stroke MM 850 900 985 1200
16 Distance Bet. Tiebar MM 835 x 835 895 x 895 980 x 980 1100 x 1100
17 Max./Min. Mold Height MM 880/350 900/400 1000/400 1200/500
18 Max. Daylight MM 1730 1800 1985 2400
19 Ejection Force TONNES 15.8 17.5 18.6 21.5
20 Ejector Stroke MM 250 260 280 320
C Electricals
23 Electric Motor KW 55 + 18.5 + 18.5 30 + 30 + 22 + 22 37 + 37 + 30 + 30 45 + 45 + 30 + 30
24 Heating Load KW 48 65 84 98
25 Total Electric Load KW 140 169 218 248
26 OVER ALL DIMENSION L X W X H 9.10 X 2.75 X 2.80 Mtr. 10.00 X 3.20 X 2.80 Mtr. 12.50 X 3.80 X 4.00 Mtr. 13.50 X 4.80 X 4.00 Mtr.
27 MACHINE WEIGHT TONNES 37 46 60 70

* Double Colour Combination (A & B Side Injection Selection)